News Center-Master Cooling

News Center

Home

Energy Saving and Consumption Reduction of Cooling Tower

The cooling tower is a big guy, composed of complicated system modules. Its energy consumption can be imagined. How to ensure the operation of the cooling tower and reduce energy consumption is something that the majority of enterprises are constantly exploring. I would like to give you a trick here, hoping to help you.

2019

06-10

Cooling tower "past life"

Cooling tower is not only a kind of equipment, but also a subject. As a device, it directly or indirectly contacts the cooling water with the atmosphere and transfers the heat of the water to the atmosphere. It is an interdisciplinary subject involving fluid mechanics, hydraulics, heat and mass transfer, mechanical transmission and materials science. In recent decades, with the continuous development of my country's economy and the continuous improvement of people's living standards, the cooling tower industry has developed faster and faster, especially small and medium cooling towers, which are almost everywhere. Cooling tower as a scientific research began in the early 20th century, has been nearly a hundred years of development history. In the development history of this century, we must not forget the past 1

2019

06-14

New website officially opened

Warmly congratulate my company's new website officially opened, welcome new and old customers to visit this site to negotiate business, and look forward to your sincere cooperation.

2023

09-28

The key parts of the closed cooling tower need special maintenance

For closed cooling towers, fans and sprinkler pumps are the key components of the entire equipment. For the maintenance of these parts, we should strictly abide by the management method. The following composite closed cooling tower as an example, the corresponding management methods are introduced in detail: square counter-flow cooling tower 1. Fan: When checking the fan, cut off the power supply of the fan motor. Sometimes it is very dangerous for the wind turbine to start suddenly due to automatic operation and so on. And cut off the power at the stop point, restore the power supply fan suddenly start dangerous. (1) Confirm whether the blade is deformed and whether there are dust, dirt and other fixed objects. In addition, it was also confirmed that the gap of the same blade in the tower body is uniform in the circumferential direction. In addition, there is no anomaly. The fan with frequent start and stop of the motor will cause failure. Pay attention to the operation method, so that the number of power-on control within 4 times/hour. square cross-flow cooling tower 2. Spray pump and circulating pump: cut off the pump power supply when checking the pump. Sometimes due to automatic operation and other reasons, the sudden start of the pump is very dangerous. (1) Pressure, flow, current, vibration, noise, etc. are usually quite different from the precursor, and processing is very important. So write a running diary. The vibration is large, please check the pipeline installation problem or the anchor bolt is loose. Sometimes it is caused by the vibration of circulating water. Flexible joints, pressure vibration or absorption devices should be considered during pipeline installation. 3. If the pump outlet valve is closed for a long time, it will burn out internally, so full attention should be paid. Frequent start and stop will soon burn out the motor. Check the following benchmarks to control the startup time. Motor power starting time: less than 7.5kw, less than 6 times/hour, less than 11kw, less than 4 times/hour. If the water in the pump stops in winter, the pump will freeze. Maintain the temperature of the pump or drain water from the inside.

2023

09-28

Why is the closed cooling tower tall and big? Look at the structure inside.

1. Water drenching filler It is the main component of hot water cooling in the tower, called "gastrointestinal system". The hot water that needs to be cooled is splashed into water droplets or a water film is formed, which increases the contact area between water and air and prolongs the contact time, promotes the heat exchange between hot water and air, and cools the water.

2023

09-28

Closed cooling tower basics-you are half an expert!

A closed cooling tower is a device that uses the contact between air and water (directly or indirectly) to cool water. Water is used as a circulating coolant to absorb heat from a system and discharge it to the atmosphere, thereby reducing the temperature in the tower and making cooling water recyclable equipment.

2023

09-28

< 1 2 3 > proceed page

online message

Wuxi Master Cooling Manufacturing Machinery Co.,Ltd

Provider of the qualified cooling system

Telephone: 86-510-85311258
Domestic: 86-13812276871
Abroad: 86-18912361965

Address: No.15, Xingshang Road, Industrial North Zone, Wanshi Town, Yixing City, Jiangsu Province, China

Fax: 0510-85303558
Mailbox:coolingtower@mstcooling.com

Mobile phone official website

Domestic sales